Hi all,
Can't believe I haven't signed up to this forum earlier as I am a big Atari fan ! But I have a bit of a dilemma regarding my Jaguar 64 machine.
I have the RGB SCART lead (the ribbon cable type) and this works perfectly when connected directly to my TV (Panasonic Viera LCD). The problem is I have quite a few consoles that I like to leave connected. If I plug the Jaguar into either my small 3 SCART switch or VCR it starts to flicker every so often (My PS2 using the same setup works fine). Also, if I try extending the Jaguar lead with a coupler and another SCART lead I get the same issue. If I extend the switch with the coupler and SCART lead and plug the Jaguar into the switch I get flicker AND no sound.
The thing is I'd quite like to run the Jaguar through a switch but may still need to extend the lead (either coming from the Jaguar or the switch). Does anyone have any ideas or what might work?
Many thanks in advance![:)]()
.
F4LL3N
Can't believe I haven't signed up to this forum earlier as I am a big Atari fan ! But I have a bit of a dilemma regarding my Jaguar 64 machine.
I have the RGB SCART lead (the ribbon cable type) and this works perfectly when connected directly to my TV (Panasonic Viera LCD). The problem is I have quite a few consoles that I like to leave connected. If I plug the Jaguar into either my small 3 SCART switch or VCR it starts to flicker every so often (My PS2 using the same setup works fine). Also, if I try extending the Jaguar lead with a coupler and another SCART lead I get the same issue. If I extend the switch with the coupler and SCART lead and plug the Jaguar into the switch I get flicker AND no sound.
The thing is I'd quite like to run the Jaguar through a switch but may still need to extend the lead (either coming from the Jaguar or the switch). Does anyone have any ideas or what might work?
Many thanks in advance
.F4LL3N