So, been busting my head and my XEGS with using MyIDE+Flash on it and Flash Media... My Post on AtariMax ... I'm persistent and didn't give up ![;)]()
Anyway, it's been suggested that using a Stabilz Mod might fix timing issues with MyIDE, but the pins didn't match up at *all*! And there were no real result using google for this, so here it is. Looking at schematics and looked at 800xl (other schematics had many errors) I replicated the circuit between Antic and Sally for O0 signal wire.
Cut trace between pin34 on Antic to pin37 on Sally, and wire to 74LS08's pin 4,5 and 6. Antic pin34 to 74LS08 pin 4 and 5; and Sally pin37 to 74LS08 pin 6. This uhm... inverter is unused on the XEGS and for Stabliz mod#1, jumper wire pin 2 and 4.
XEGS Stabilz Mod![:)]()
Some really large pictures:
![IMG_00000625_hdr.jpg]()
![IMG_00000627_hdr.jpg]()
![IMG_00000629_hdr.jpg]()
![IMG_00000628_hdr.jpg]()
Anyway, it's been suggested that using a Stabilz Mod might fix timing issues with MyIDE, but the pins didn't match up at *all*! And there were no real result using google for this, so here it is. Looking at schematics and looked at 800xl (other schematics had many errors) I replicated the circuit between Antic and Sally for O0 signal wire.
Cut trace between pin34 on Antic to pin37 on Sally, and wire to 74LS08's pin 4,5 and 6. Antic pin34 to 74LS08 pin 4 and 5; and Sally pin37 to 74LS08 pin 6. This uhm... inverter is unused on the XEGS and for Stabliz mod#1, jumper wire pin 2 and 4.
XEGS Stabilz Mod
Some really large pictures:
