regular Jaguar to Stubulator help needed

Hi@all

I need to modify a regular Jaguar to a Dev console for an Alpine .. I put a 2nd Eprom with Stub 94 on Top of the regular Bios and a switch for switchung to Stubulator 94

I solder a 2 5 Pin row to printed on Board U32.for the STOP Cable.

Some People tell me that i have to desolder an 1 kohm resistor, but where it is ?

At the Bottom in front of the 2 5 Pin row there is a resistor with 102 printed on it. Is this the right one ?

Later i´ll have to have to put a 1kohm resistor between Pin 4 and 5 of the Stop Cable for a "normal" Jaguar to run.

Need help for this mod.

kind regard

zaxxon-hh